|
Pay Welder
Pay Welder Product Features：
● ENGINE
Equipped the Cummins 6BTA5.9-C seris disesl engine, high quality and easy maintainance,
ensuring sustained power output for the welding procedure demand. Enlarge cooling system
and cold area starter device can be install while using in the tropical or frozen area.
●GENERATOR
Through a direct-drive mode from the engine,Stanford generator is employed for the pay
welder’s generating system.The generator is bushless maintainance free type ensuring a
longevity of optimal performance.
●HYDRUALIC SYSTEM
American Sauer hydraulic system is installed in the equipment for power both the travelling
of tractor and crane operation. Pump is directly connected to the drive train after the engine
and generator.
●UNDERCARRIAGE
Hydrostatic driven gives enough power for traveling on even more grade slope of the work site,
track counter rotation on the spot give more maneuverable operation of the tractor, high
ground clearance and low ground Parameter list MODEL | GHZ100 | GHZ125 | GHZ160 | Number of welding stations | 2 | 2-4 | 4-6 | ENGINE |
| Model | Cummins 6BTA5.9-C170 | Cummins 6BTA5.9-C180 | Weichai WP6D155E10 | Rated power@rated speed | 127KW@2000 RPM | 132KW@2200 RPM | 155KW@1800 RPM | Number of cylinders | 6 | 6 | 6 | Electrical system | 24 V | 24 V | 24 V | Starter | 6.6KW / 8.25 HP | 6.6KW / 8.25 HP | 6KW / 7.5 HP | Displacement | 5.9 L | 5.9 L | 6.75 L | GENERATOR |
| Model | Stanford UCI274C | Stanford UCI274E | Stanford UCI274F1-4 | Rated capacity | 100kVA | 125kVA | 160kVA | Rated voltage | 220V/380V | 220V/380V | 220V/380V | Rated frequency | 50hz/60hz | HYDRAULIC SYSTEM | Make | American Sauer | Pump output – max | 220 l/min | 220 l/min | 270 l/min | Working pressure | 29000 kpa | 29000 kpa | 29000 kpa | Crane pump output | 35 l/min | 35 l/min | 45l/min | Working pressure | 20000 kpa | 20000 kpa | 30000 kpa | CRANE | Make | HIAB | HIAB | HIAB | Maodel | ST083-032 | ST083-032 | 111B-2 | Lifting capacity | 3200kg | 3200kg | 5800kg | Max. reach with(hyd.telescopes) | 7.8m | 7.8m | 8m | Rotation form | 360°motor rotation | 360°motor rotation | 410°cylinder rotation | Operation | inside the cabin | UNDERCARRIAGE | Width of standard shoes | 600 mm | 600 mm | 600 mm | Length of track on ground | 2760 mm | 2760 mm | 3100 mm | Track gauge | 1870 mm | 1870 mm | 2150 mm | Ground clearance | 570 mm | 570 mm | 570 mm | Number of track rollers (each side) | 7 | 7 | 7 | Number of carrier rollers (each side) | 2 | 2 | 2 | Travel speed(km/h) | low 0~2.9, high 0~4.6 | low 0~4.5, high 0~7 | ELECTRICAL CABINET | Power output | 2 380V, total 10kw
2 20V, total 2.2kw | 2 380V, total 10kw
2 220V, total 2.2kw | 2 380V, total 10kw
2 220V, total 2.2kw | Leakage breaker | yes | yes | yes | GENERAL SPECIFICATION | Dimensions—L*W*H | 5850*2470*3050 | 5850*2470*3050 | 6255*3000*3250 | Operating weight(without load) | 10T | 10T | 13T | Operating temperature | +65°~ -40° | +65°~ -40° | +65°~ -40° | OPTIONAL EQUIPMENT | Air compressor | Ingersoll Rand; 960L/min 12bar or 470L/min 8bar | Electrode oven | Phoenix: 5kg or 50kg | Heater or A/C | Wall beside or roof mounted | Gas bottle rack | 4~6bottles | Welding M/C | Linclon350,400,600.etc. |
|
|
